Netware Driver Installation Overview For Ethernet PCMCIA Adapters This directory contains Ethernet DOS ODI driver PCMMLID.COM that supports NetWare 3.x and 4.0; NetWare Lite; and other ODI interface applications. PCMMLID.COM : DOS/ODI Driver for NetWare 3.x and 4.0. The following instructs you on how to install the Novel NetWare Ver. 386 DOS ODI Driver. 1. Things You Need 컴컴컴컴컴컴컴� Before you start with the installation process, make sure you have the following: a. Ethernet PCMCIA Hardware Driver Disk. b. Novell DOS ODI WORKSTATION SERVICES diskette (WSGEN). 2. How To Install 컴컴컴컴컴컴컴 You need the following five files to install DOS ODI DRIVER. a. LSL.COM ---- supported by Novell b. PCMMLID.COM ---- Novell DOS ODI Driver, supported by manufacturer c. IPXODI.COM ---- supported by Novell d. NETx.COM ---- supported by Novell or EMSNETx.EXE or XMSNETx.EXE e. NET.CFG ---- optional configuration file After booting your workstation, enter the following commands: LSL PCMMLID IPXODI NETx you can then login to the file server. Normally, you will need a NET.CFG file to configure your Ethernet PCMCIA card. You can check "Netware 386 Installation, Appendix E" for more information about NET.CFG. Below is a sample NET.CFG file: LINK DRIVER PCMMLID port 300 int 5 Frame Ethernet_II Frame Ethernet_802.3 Protocol IPX 0 Ethernet_802.3 : : ======================================================================= Novell, NetWare, Novell Advanced NetWare are registered trademarks of Novell Incorporated. Ethernet is registered trademark of Xerox Corporation. Other trademarks or brand names unintentionally omitted are trademarks or registered trademarks of their respective companies. =======================================================================