[E200P] Type = NDIS Title = "CNet CN200Eplus series Ethernet Adapter" Version = 1.15 DRIVERNAME = E200P$ [File] Name = E200P.DOS Path = \NDIS_20 [IOBASE] tag = IOAddress display = "I/O base address" type = Hexadecimal default = 300 set = 0, 200, 220, 240, 260, 280, 2A0, 2C0, 2E0, 300, 320, 340, 360, 380, 3A0, 3C0, 3E0 ;range = 200 - 360 ;step = 20 optional = Yes editable = Yes virtual = No help = "This parameter specifies the starting address of the input/output port for the network adapter card. The defined value must be based on the jumper configuration of the network adapter card. This parameter is only valid for Personal Computer AT adapters. Refer to your adapter manufacturer's documentation for more information." [INTERRUPT] tag = Interrupt display = "Interrupt level" type = decimal default = 0 set = 0, 3, 4, 5, 9, 10, 11, 12, 15 optional = Yes editable = Yes virtual = No help = "This parameter specifies the interrupt level used for notifications between the workstation and the network adapter card. Ensure that no conflicts exist between the various system components in their use of interrupts. This parameter is only valid for Personal Computer AT adapters. Refer to your adapter manufacturer's documentation for more information."