;
;   ACME Super Fast System Board
;
BOARD
  ID="ACE1010"
  NAME="ACME Super Fast System Board"
  MFR="ACME"
  CATEGORY="SYS"
  SLOT=EMB(0)
  COMMENTS="This is the Board Identification Block comment field
	    for the ACME Super Fast System Board."
  HELP="This is the Board Identification Block help field
       for the ACME Super Fast System Board."

SYSTEM
  NONVOLATILE = 4096
  AMPERAGE = 20000
  SLOT(1) = ISA16  LENGTH = 341
  SLOT(2) = ISA16  LENGTH = 341
  SLOT(3) = EISA   LENGTH = 341
  SLOT(4) = EISA   LENGTH = 341
  SLOT(5) = EISA,"VIDEO"   LENGTH = 341  LABEL = "VIDEO"
  SLOT(6) = EISA   LENGTH = 341
  SLOT(7) = EISA   LENGTH = 341
  SLOT(8) = ISA8   LENGTH = 140
  MEMORY = 640K
    ADDRESS = 0h    
    CACHE = YES
    STEP = 256K

SWITCH(1) = 8
  NAME="SW1"
  STYPE=DIP
  REVERSE=YES
  INITVAL=LOC(8)   0
  FACTORY=LOC(1-8) 00101010
  COMMENTS="This is the Switch Identification Block comment field
	    for the 1st set of switches for the ACME Super Fast System Board."
  HELP="This is the Switch Identification Block help field
       for the 1st set of switches for the ACME Super Fast System Board."

SWITCH(2) = 8
  NAME="SW2"
  STYPE=SLIDE
  FACTORY=LOC(1-8) 00001000
  COMMENTS="This is the Switch Identification Block comment field
	    for the 2nd set of switches for the ACME Super Fast System Board."
  HELP="This is the Switch Identification Block help field
       for the 2nd set of switches for the ACME Super Fast System Board."

JUMPER(1) = 2
  NAME="E7"
  JTYPE=inline
  REVERSE=yes
  FACTORY=LOC(1^2 2^3) 01
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 1st set of jumpers on the ACME Super Fast System Board."
  HELP="This is the Jumper Identification Block help field
	    for the 1st set of jumpers on the ACME Super Fast System Board."

JUMPER(2) = 5
  NAME="E8"
  JTYPE=inline
  REVERSE=yes
  VERTICAL=yes
  FACTORY=LOC(1^2 2^3 3^4 4^5 5^6) 10010
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 2nd set of jumpers on the ACME Super Fast System Board."
  HELP="This is the Jumper Identification Block help field
	    for the 2nd set of jumpers on the ACME Super Fast System Board."

JUMPER(3) = 2
  NAME="E10"
  JTYPE=inline
  REVERSE=yes
  VERTICAL=yes
  FACTORY=LOC(1^2 2^3) 01
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 3rd set of jumpers on the ACME Super Fast System Board."
  HELP="This is the Jumper Identification Block help field
	    for the 3rd set of jumpers on the ACME Super Fast System Board."

JUMPER(4) = 2
  NAME="E12"
  JTYPE=inline
  REVERSE=yes
  VERTICAL=yes
  FACTORY=LOC(1^2 2^3) 01
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 4th set of jumpers on the ACME Super Fast System Board."
  HELP="This is the Jumper Identification Block help field
	    for the 4th set of jumpers on the ACME Super Fast System Board."

JUMPER(5) = 5
  NAME="E17"
  JTYPE=inline
  REVERSE=yes
  VERTICAL=yes
  INITVAL = LOC(2^3 4^5) 11
  FACTORY=LOC(1^2 2^3 3^4 4^5 5^6) 01010
  COMMENTS="E17 Selects RAM banks for Internal Memory Expansion Board.  See
       Manual for details.  Default is No Expansion RAM, Jumper pins 2-3 and 4-5."
  HELP="This is the Jumper Identification Block help field
       for the 5th set of jumpers on the ACME Super Fast System Board."

SOFTWARE(1) = "Be sure and set jumpers E3, E4, E5 and E16 to select the
	    following options:\n"

FUNCTION = "Physical Slot Labels"
  TYPE = "SLOTORDER"
  SHOW = NO
  CHOICE = "Physical Slot Labels"
    FREEFORM = 16,00,01,02,03,04,05,07,06,08,09,12,11,255,13,255,10

GROUP = "memory functions group"

  FUNCTION = "Base System Memory Option"
    TYPE = "mem"
    COMMENTS="This is the Function Statement Block comment field
	    for the Base System Memory Option for the ACME
	    Super Fast System Board."
    HELP="This is the Function Statement Block help field
       for the Base System Memory Option for the ACME
       Super Fast System Board."

    CHOICE = "640k Base Memory (default)"
    HELP="This is the Choice Statement Block help field
	    for the default 640k Base Memory for the ACME
	    Super Fast System Board."

    LINK
      MEMORY=640k
	   ADDRESS=0h
	   MEMTYPE=SYS
	   WRITABLE=YES
          CACHE = YES
	   INIT=SWITCH(1) LOC(1 2) 00

    CHOICE = "512k Base Memory"
    HELP="This is the Choice Statement Block help field
	    for 512k Base Memory for the ACME Super Fast
	    System Board."

    LINK
      MEMORY=512k
	   ADDRESS=0h
	   MEMTYPE=SYS
	   WRITABLE=YES
          CACHE = YES
	   INIT=SWITCH(1) LOC(1 2) 01

    CHOICE = "256k Base Memory"
    HELP="This is the Choice Statement Block help field
	    for 256k Base Memory for the ACME Super Fast
	    System Board."

    LINK
      MEMORY=256k
	   ADDRESS=0h
	   MEMTYPE=SYS
	   WRITABLE=YES
          CACHE = YES
	   INIT=SWITCH(1) LOC(1 2) 10

  FUNCTION = "ROM Subfunctions"
    COMMENTS="This is the Function Statement Block comment field
	    for the ROM Subfunctions for the ACME
	    Super Fast System Board."
    HELP="This is the Function Statement Block help field
	    for the ROM Subfunctions for the ACME
	    Super Fast System Board."

    SUBFUNCTION = "System ROM Configuration & Type"
      CONNECTION = "This is the Subfunction Statement connection field
                    for the ROM Configuration & Type for the ACME Super
                    Fast System Board."
      COMMENTS="This is the Subfunction Statement comment field
		   for the ROM Configuration & Type for the ACME
		   Super Fast System Board."
      HELP="This is the Subunction Statement help field
	      for the ROM Configuration & Type for the ACME
	      Super Fast System Board."

      CHOICE = "Select 32kbyte ROM (default)"
      HELP="This is the Choice Statement Block help field
	      for default 32k ROM for the ACME Super Fast
	      System Board."

	   FREE
	     INIT = Jumper(3) loc(1^2 2^3) 10

      CHOICE = "Select 16kbyte ROM "
      HELP="This is the Choice Statement Block help field
	      for 16k ROM for the ACME Super Fast
	      System Board."

	   FREE
	     INIT = Jumper(3) loc(1^2 2^3) 10

    SUBFUNCTION = "Enable/Disable 2nd ROM Set"
      CONNECTION = "This is the Subfunction Statement connection field
         for the Enable/Disabel 2nd ROM Set for the ACME Super
         Fast System Board."
      COMMENTS="This is the Subfunction Statement comment field
	   	for the Enable/Disable 2nd ROM Set for the ACME
		   Super Fast System Board."
      CHOICE = "Disable 2nd ROM Set (default)"
      HELP="This is the Choice Statement Block help field
	      for default Disable 2nd ROM Set for the ACME Super Fast
	      System Board."

	   FREE
	     INIT = Jumper(4) loc(1^2 2^3) 01

      CHOICE = "Enable 2nd ROM Set "
      HELP="This is the Choice Statement Block help field
	      for Enable 2nd ROM Set for the ACME Super Fast
	      System Board."

	   FREE
	     INIT = Jumper(4) loc(1^2 2^3) 10

  FUNCTION = "System Reserved Memory"
    TYPE="mem"
    COMMENTS="This is the Function Statement Block comment field
	    for the System Reserved Memory for the ACME
	    Super Fast System Board."
    HELP="This is the Function Statement Block help field
	    for the System Reserved Memory for the ACME
	    Super Fast System Board."

    CHOICE="Re-mapped ROMBIOS Memory"
    HELP="This is the Choice Statement Block help field
	    for Re-mapped ROMBIOS Memory for the ACME Super Fast
	    System Board."

    LINK
      MEMORY=128k
	   ADDRESS=0E0000h
	   MEMTYPE=OTHER
	   WRITABLE=NO

ENDGROUP

FUNCTION = "Parallel Port"
  TYPE = "par"
  COMMENTS="This is the Function Statement Block comment field
	  for the Parallel Port for the ACME
	  Super Fast System Board."
  HELP="This is the Function Statement Block help field
	  for the Parallel Port for the ACME
	  Super Fast System Board."

  CHOICE = "LPT1"
  HELP="This is the Choice Statement Block help field
	  for LPT1 for the ACME Super Fast System Board."

    LINK
      IRQ = 7
      PORT = 03BCh-03BFh
      INIT = JUMPER(1) LOC(1^2 2^3) 01

  CHOICE = "Disabled"
    DISABLE = yes
    HELP="This is the Choice Statement Block help field
	    to disable the Parallel Port for the ACME Super
	    Fast System Board."

    FREE
      INIT = JUMPER(1) LOC(1^2 2^3) 10

GROUP = "Serial Port Functions Group"

  FUNCTION = "Serial Port"
    TYPE = "ser"
    COMMENTS="This is the Function Statement Block comment field
	    for the Serial Port for the ACME
	    Super Fast System Board."
    HELP="This is the Function Statement Block help field
	    for the Serial Port for the ACME
	    Super Fast System Board."

    CHOICE = "Serial Port as COM1"
    HELP="This is the Choice Statement Block help field
	    for Serial Port Com1 for the ACME Super Fast System Board."

    LINK
    	IRQ = 4
   	PORT = 03F8h-03FFh
   	INIT = software(1) "Ser COM1"

    CHOICE = "Serial Port as COM2"
    HELP="This is the Choice Statement Block help field
	    for Serial Port Com2 for the ACME Super Fast System Board."

    LINK
	   IRQ = 3
   	PORT = 02F8h-02FFh
   	INIT = software(1) "Ser COM2"

    CHOICE = "Disabled"
    DISABLE = yes
    HELP="This is the Choice Statement Block help field
	    to disable the Serial Port for the ACME Super Fast System Board."

    FREE
   	INIT = software(1) "COM1 Disabled"

  FUNCTION = "Modem (Internal)"
    TYPE = "ser"
    COMMENTS="This is the Function Statement Block comment field
	    for the Internal Modem for the ACME
	    Super Fast System Board."
    HELP="This is the Function Statement Block help field
	    for the Internal Modem for the ACME
	    Super Fast System Board."

    CHOICE = "Disabled (default)"
    DISABLE = yes
    HELP="This is the Choice Statement Block help field
	    to disable the Internal Modem for the ACME Super Fast System Board."

    FREE
   	INIT = software(1)  "Modem Disabled"

    CHOICE = "Modem as COM2"
    HELP="This is the Choice Statement Block help field
	    for Modem as COM2 for the ACME Super Fast System Board."

    LINK
   	IRQ = 3
   	PORT = 02F8h-02FFh
   	INIT = software(1)  "Modem COM2"

    CHOICE = "Modem as COM1"
    HELP="This is the Choice Statement Block help field
	    for Modem as COM1 for the ACME Super Fast System Board."

    LINK
   	IRQ = 4
   	PORT = 03F8h-03FFh
   	INIT = software(1)  "Modem COM1"

ENDGROUP

FUNCTION = "256kb or 1Mb DRAM Mem Chips"
  COMMENTS="This is the Function Statement Block comment field
	  for 256k or 1Mb DRAM Mem Chips for the ACME
	  Super Fast System Board."
  HELP="This is the Function Statement Block help field
     for 256k or 1Mb DRAM Mem Chips for the ACME
     Super Fast System Board."

  CHOICE = "256kb DRAM Chips"
  HELP="This is the Choice Statement Block help field
	  for 256k DRAM Chips for the ACME Super Fast System Board."

  FREE
    INIT = SWITCH(1) LOC(3 4) 10
    INIT = SWITCH(2) LOC(4) 1

  CHOICE = "1Mb DRAM Chips"
  HELP="This is the Choice Statement Block help field
	  for 1Mb DRAM Chips for the ACME Super Fast System Board."

  FREE
    INIT = SWITCH(1) LOC(3 4) 01
    INIT = SWITCH(2) LOC(3) 1

INCLUDE = "ACE1010.OVL"
